Concrete vibrator cement pavement vibrating beam three-roller vibrator concrete row vibrator electric vibrator row vibrator concrete vibrator rice cement vibrator
maximum depth of vibrator
Traveling motor power
Vibrator stand-alone power
Lifting motor power
Walking speed
To buy good products, look to Shandong Dingcheng to give you the best quality products at the lowest price
Type concrete This product is widely used for deep vibration in the construction of various highways, municipal roads, squares, airports, runways and other concrete projects to improve density
The concrete row vibrator product has the following characteristics
Discharge The row-type vibrator is designed for automatic walking to reduce the labor intensity of workers and improve construction efficiency
The row-type vibrator can perform deep vibration of concrete to increase density
This design can adjust the width of the road between the rollers Any adjustment from to to improves the adaptability of construction
The design has a unique free lifting system for the vibration extraction rod, which can be freely operated at the vibration depth and can be lifted up when transferring the construction site
Overview
Concrete row type The main structure of the vibrator equipment. The structure of the concrete pavement row vibrator is mainly composed of the frame traveling mechanism, the array rod lifting mechanism, the plug-in vibrator, the electrical control box and other parts
The use of concrete row vibrator equipment< br/> Preparation before use
① Check whether the motor power cord grounding wire is reliable
② Check whether the connecting bolts are loose
③ Check whether the electrical control system is sensitive and reliable
④ Check Add an appropriate amount of lubricating oil to all lubrication points such as bearings, chain pins, etc. to ensure good lubrication
⑤The steel formwork should be supported firmly and keep its surface flat in the same plane
Construction operations
①Move the machine Arrive at the construction site and place the four traveling rollers on the formwork
② Turn on the power and start each vibrating rod with no load to make it run normally
③ Slowly lower the array rod so that the vibrating rod is submerged into the concrete to an appropriate depth Then start the walking system and move forward. When working, it is strictly prohibited to move backwards. When moving backwards, lift the vibration exhaust rod
Maintenance and maintenance of concrete row plugs
① At the end of each shift, the vibration rod vibrator adhering to the roller should be removed Clean the concrete on top to prevent solidification from affecting the next operation
② Add grease to each bearing part once a week. Each chain should also add lubricating oil frequently to maintain good lubrication. At the same time, care should be taken to avoid sand and other debris. to the chain to prevent premature chain damage
③ Generally, the entire machine should be comprehensively inspected and maintained once a month or at the end of each phase of the project
④ Always pay attention to the tightness of the V-belt chain and respond promptly if it is too loose. Adjustment of each fastening bolt should also be checked frequently to prevent loosening
⑤When the machine is not used for a long time, the machine should be parked in a dry place protected from rain and sun
Electrical switch
Independently produced by Jining Dingcheng, Shandong
br/> Factory direct sales that will satisfy you
Production location: Manager Du, Sales Manager, High-tech Zone, Jining City, Shandong Province
Contact number
The No. 1 manufacturer of concrete row vibrating beams in the industry